STC Key safe is an ideal solution to store a high amount of the keys with the possibility of storing other valuables in separated compartments. STC key safes are burglary certified in GRADE I according to EN 1143-1 and have been tested in Geman testing center of ECB-S.
Pull out walls are providing an ideal solution for properties with the need to store a high amount of keys in a safe and with an organized storage system.
The STC safe series provides a storage solution of 128 to 800 keys. All safes are available either with key or code lock.
|Product Name||STC 1 - 128 Kombi - 128 keys (125 L) - Burglary Grade I - Key Lock|
|Safe Series||STC Key Safes - Burglary Tested in Grade I - Pull out walls in combination with shelves provide ideal storage system for keys and binders.|
|Color||Graphite Grey (RAL 7024) / Light Grey (RAL 7035)|
|Delivery time||Call for delivery|
|Safe Purpose||Documents, Keys|
|Weight - kg||154|
|Burglary Grade||GRADE I|
|Burglary Test Method||EN 1143-1|
|Certification centre||ECB•S Germany|
|Cash Rating||GRADE I|
|Fire Resistance||No Fire Insulation|
|Capacity - Liter||125|
|Capacity - Keys||128|
|Height - External (mm)||1400|
|Width - Exterior (mm)||400|
|Depth - Exterior (mm)||420|
|Depth incl. Lock / Handle (mm)||432|
|Height - Interior (mm)||1,320|
|Width - Interior (mm)||311|
|Depth - Interior (mm)||305|
|Door Opening - Angle||180 Degrees - Internal Hinges|
|Door Bolts||4-sided bolts|
|Hinges side||Right Side|
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|