Fire Star Plus are Insurance approved Data safes in Grade 1 with a fire resistance up till 120 minutes.
The safes are ideal for the storage of Data Media.
Fire Star Plus protect your Data from Fire Gases and Water from fire extinguishers due to a special expanding sealing around the door.
The walls are constructed with high resistance against methods of burglar attempts. The door is secured with powerful four-way bolts.
This series can be bolted to the floor using the included mounting kit.
The safe is available with a key lock. Or code lock at an additional charge.
Classified EN 1047-1 - This level of classification indicates resistance during the exposure to heat. It prevents data media from destruction for 120 min at an outside temperature of 1090ºC and the inside temperature does not exceed 50ºC. The maximum air humidity in the safe designated for data media is 85%. The safe is exposed to sudden heat in order to simulate an explosion and is dropped from a height of 9.15 meters to simulate a fall through a ceiling.
|Product Name||Fire Star Plus 2 Fireproof Data Safe - 168 LTO Tapes - Burglary Test Grade I / Fire Test 120 min - Key Lock|
|Model||Fire Star Plus 2 - Nøglelås|
|Safe Series||Fire Star Plus - Data safes with Burglary Test in Grade I and Fire Test for 120 minutes. Protection against Fire Gases and Water from fire extinguishers. Meets requirements for resistance to electromagnetic interference of data. Supplied with a Key Lock.|
|Color||Graphite Grey (RAL 7024) / Light Grey (RAL 7035). Other colors (optional + 15%)|
|Delivery time||2-3 weeks|
|Safe Kind||Free Standing|
|Weight - kg||516|
|Burglary Grade||GRADE I|
|Burglary Test Method||EN 1143-1|
|Certification centre||VdS and ECB•S Germany|
|Cash Rating||GRADE I|
|Fire Resistance||No Fire Insulation|
|Fire Certification||EN 1047-1: S 120 DIS|
|Fire Test Method||EN 1047-1|
|Fire Test center||ECB•S Germany|
|Lock Type||Double-bit Key Lock (160 mm)|
|Shelf (Standard)||2 Movable shelves|
|Capacity - Liter||137|
|Capacity - Binders||9|
|Capacity Data - LTO tapes||168 LTO tapes (4 pullout shelves / 42 units each)|
|Height - External (mm)||1012|
|Width - Exterior (mm)||854|
|Depth - Exterior (mm)||851|
|Depth incl. Lock / Handle (mm)||927|
|Height - Interior (mm)||610|
|Width - Interior (mm)||494|
|Depth - Interior (mm)||455|
|Door Opening - Height (mm)||610|
|Door Opening - Width (mm)||494|
|Door Opening - Angle||180 Degrees - Internal Hinges|
|Width (Safe + Door) - Door Open 180 degrees||1837|
|Depth (Safe + Door) - Door Open 90 degrees||1630|
|Door Bolts||4-sided bolts (Ø 25 mm)|
|Hinges side||Right Side|
|Door Structure||4-walled steel (235 mm)|
The Fire Star Plus safes are perfect for protecting and storaging your data.
The Fire Star Plus safes are tested and ECB-S certified in burglary protection Grade 1, according to EN 1143-1. The safes are fire resistant up till 120 minutes.
The walls and door are produced with high resistance against burglary-attempts including a special barrier to withstand hammer, chisel, drill and cutting attachments.
The door is secured with powerful four-way bolts and engages security by hinges. The Fire Star Plus can be bolted to the floor using the included mounting kit.
The safe series meets the requirements for testing electromagnetic resistance of interference for the stored data media in accordance to European Standards.
These high quality data safes are manufactured and certified in Germany.
This fireproof safe comes with a double bit Key Lock and 2 keys. You can order your safe with a Code Lock including 9 user codes at an additional charge.
The safe comes with 2 pull-out drawers. The Fire Star Plus is available in Graphite Grey (RAL 7024) and Light Grey (RAL 7035).
If you have questions about finding the right configuration for your needs, please don’t hesitate to contact us.
*You should always check the product characteristics for the exact dimensions, weight, number of shelves etc.
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|
Before buying a fireproof safe, you need to consider that the sensitivity to heat varies throughout material. So you should know the material of the valuables you want to keep protected from fire damage. Usually, it is distinguished between documents (business reports, licenses, birth certificates, old artifacts, passports, insurance documents etc.) made of paper, and data (hard drives, CDs & DVDs, old negatives & photographs, flash drives, old cassette tapes, USB drives, micro SD cards, etc.). Thus, different fire resistance standards are required:
When exposed to fire, the interior temperature in the closed safe should not increase by more than 150°C because this would harm the documents. As an insulation material, a special mixture of cement/mortar and water is usually used. The relatively high amount of bound water in the mixture keeps the temperature in the wall of the safe at a maximum of around 100°C.
Data is damaged at lower degrees. So when exposed to fire, the interior temperature in the closed data safe should not increase by more than 30-50°C. The walls of the safe are usually constructed in several layers. In the first layer, a special mixture of cement/mortar and water is used. There the temperature does not increase to more than 100°C. In the middle layer, special insulation materials are used, which prevent the heat from getting through the wall. As third layer, heat-absorbing material is used, which has a cooling effect on the wall.
Depending on the requirements of the fire resistance class, different filling materials or wall thicknesses are used.
Common to both types: Sealings are installed in the gaps of the door. Depending on the fire class requirements, high-temperature-resistant seals against fire gases or penetrating heat are utilized. These modern seals swell from a certain temperature and reliably close the door gap in the event of a fire.