Fire Star are Insurance approved Data safes in Grade 1 with a fire resistance up till 60 minutes.
The safes are ideal for the storage of Data Media.
Fire Star protect your Data from Fire Gases and Water from fire extinguishers due to a special expanding sealing around the door.
The walls are constructed with high resistance against methods of burglar attempts. The door is secured with powerful four-way bolts.
This series can be bolted to the floor using the included mounting kit.
The safe is available with a key lock. Or code lock at an additional charge.
Classified EN 1047-1 - This level of classification indicates resistance during the exposure to heat. It prevents data media from destruction for 60 min at an outside temperature of 1090ºC and the inside temperature does not exceed 50ºC. The maximum air humidity in the safe designated for data media is 85%. The safe is exposed to sudden heat in order to simulate an explosion and is dropped from a height of 9.15 meters to simulate a fall through a ceiling.
|Product Name||Fire Star 1 Fireproof Data Safe - Burglary Test Grade I / Fire Test 60 min - Key Lock|
|Safe Series||Fire Star Plus - Data safes with Burglary Test in Grade I and Fire Test for 120 minutes. Protection against Fire Gases and Water from fire extinguishers. Meets requirements for resistance to electromagnetic interference of data. Supplied with a Key Lock.|
|Color||Graphite Grey (RAL 7024) / Light Grey (RAL 7035)|
|Weight - kg||198|
|Burglary Grade||GRADE I|
|Burglary Test Method||EN 1143-1|
|Certification centre||VdS and ECB•S Germany|
|Cash Rating||GRADE I|
|Fire Resistance||No Fire Insulation|
|Fire Certification||EN 1047-1: S 60 DIS|
|Fire Test Method||EN 1047-1|
|Fire Test center||ECB•S Germany|
|Capacity - Liter||23|
|Height - External (mm)||646|
|Width - Exterior (mm)||596|
|Depth - Exterior (mm)||555|
|Depth incl. Lock / Handle (mm)||0|
|Height - Interior (mm)||324|
|Width - Interior (mm)||308|
|Depth - Interior (mm)||228|
The Fire Star safes are perfect for protecting and storaging your data.
The Fire Star safes are tested and ECB-S certified in burglary protection Grade 1, according to EN 1143-1. The safes are fire resistant up till 60 minutes.
The walls and door are produced with high resistance against burglary-attempts including a special barrier to withstand hammer, chisel, drill and cutting attachments.
The door is secured with powerful four-way bolts and engages security by hinges. The Fire Star can be bolted to the floor using the included mounting kit.
The safe series meets the requirements for testing electromagnetic resistance of interference for the stored data media in accordance to European Standards.
These high quality data safes are manufactured and certified in Germany.
This fireproof safe comes with a double bit Key Lock and 2 keys. You can order your safe with a Code Lock including 9 user codes at an additional charge.
The safe comes with 2 pull-out drawers. The Fire Star 1 is available in Graphite Grey (RAL 7024) and Light Grey (RAL 7035).
If you have questions about finding the right configuration for your needs, please don’t hesitate to contact us.
*You should always check the product characteristics for the exact dimensions, weight, number of shelves etc.
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|