The keypad BR5010 is compatible e.g. with EM2020 and EM 3520.
BR 5010 - provides easy operation. The code numbers could be read only from the top what makes this input unit a good solution for safes under the desk with a good protection.
Keypad is provided with the integrated battery compartment and can be mounted as a stacionar (eg with the Lock EM2020) or turneable unit (eg with the Lock EM 3520).
The battery compartment can be found underneath the keypad
|Product Name||BR5010 Keypad|
|Model||EM2020 Electronic Lock|
|Display||No, only LED light|
|Number of users||1|
|Penalty Time||Yes, 5 minutes|
|Time Delay functionality||Yes (1-99 minutes)|
|Open window funcionality||Yes (1-19 minutes)|
The input unit is compatible e.g. with the Locks EM2020 and EM 3520
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
If you are having the issue that you are typing in your code, but the safe will not open, this means that in 95% of the cases, a battery change will solve the issue. In general, this is always the first step to do when troubleshooting your lock.
If the keypad test doesn't identify any issues, you may be typing the wrong code. The M-Locks BR 5010 create a long beep-sound if you type in the wrong code. Please keep in mind that if you are typing the wrong code four times, you will be locked out for 5 minutes. After expiration, entry of two more invalid codes restarts the 5 minute blocking period.
Follow this step-by-step process to check that your keypad works properly:
If the keypad test doesn't identify any issues, you may be typing the wrong code. The M-Locks BR 5010 creates a long bip if you type in wrong code. Please keep in mind that if you are typing the wrong code four times, you will be locked out for 5 minutes. After expiration, entry of two more invalid codes restarts the 5 minute blocking period.
Download the manual by clicking the link below:
This video also outlines the process of checking your keypad:
Safe locks are classified in ascending security classes going from A through D as per EN-1300 Regulation.
Additionally, starting at security grade IV, safes and vaults must contain 2 separate locks and even 3 for grades XI and higher.
The following table attempts to explain the lock requirements that each safe must meet in order to maintain the certification for the EN-1143-1 burglary resistance grade.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|