Floppy disk insert for installation in Paper Star Plus 4 and 5. Equipped with fire protection S 120 P / DIS.
|Product Name||Data Insert Beta - Fire Test 120 min - Paper Star Plus|
|Model||Beta - Insert for Paper Star Plus 4, 5|
|Color||Light Grey (RAL 7035)|
|Delivery time||4-5 weeks|
|Compatible with||Paper Star Plus 4 / 5|
|Weight - kg||97|
|Fire Certification||EN 1047-1: DI 120 P/DIS|
|Fire Test Method||EN 1047-1|
|Fire Test center||ECB•S Germany|
|Capacity - Liter||47|
|Height - External (mm)||660|
|Width - Exterior (mm)||730|
|Depth - Exterior (mm)||430|
|Height - Interior (mm)||447|
|Width - Interior (mm)||490|
|Depth - Interior (mm)||213|
|Hinges side||Right Side|
Floppy disk insert for the installation in the Document Safe Paper Star Plus 4 and 5. The disk insert makes it possible to also store data media in the document safe. It offers 2 hours of fire protection for data carriers (S 120 P / DIS protection according to EN 1047-1, tested by IBMB / MPA at the TU Braunschweig, Germany).
The insert has 2 levels and 1 shelf for the storage of floppy disks.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|
Fire resistance means that the safes resist heat and smoke (and some protect against water) over a given period of time.
Fire resistance is created by the use of certain materials inside the walls of the safe. The walls are filled with a special concrete and water mix. The relatively high amount of bound water in the mixture prevents the safe from heating up too fast. The walls and the door not only include special materials but also are thicker than security safes that are not fireproof.
Fire insulation layer -not certified- that protects from initial phases of a fire.
Internal temp. under 170ºC for 30 min with external temp. above 842ºC
Internal temp. under 170ºC for 60 min with external temp. above 842ºC
Internal temp. under 180ºC for 90 min with external temp. above 1006ºC
Internal temp. under 170ºC for 120 min with external temp. above 1090ºC